Description
Prolyte MPT Tower
Item code: 112140009
The MPT tower is based on H30V truss and employs a sleeve block that fits to any of the 30 or 40 Series trusses on all four sides by means of bolted CCS6 couplers (either male or female). In combination with an adapter plate, it is also possible to use the sleeve block with either S36R or S36V truss The MPT tower has a self-weight of 115 kg. The MPT sleeve block is a fully bolted structural element, making it much stronger and more precise than conventional welded versions. The top section and base section can facilitate the use of either a hand winch or a chain hoist. the MPT tower is cost-effective investment. You need only purchase the special parts if you wish to expand your truss system with towers.
*Check out two versions of the top section in product sheet
- Max Height – 8.00m
- Max Loading Capacity – 1000kg*
- Max load Handwinch – 750kg (750m Tower)
- Type Mast Sections – H30V
- Sleeve Block Suitable for Truss-Series -X or H30D, X or H30V, X or H40D and X or H40V, S36R, S36V
- Alloy Alu Parts – EN-AW 6082 T6
- Coupling System Tower – CCS6 series
- Self Weight – 115kg
* There is a structural relation between tower height and size, further the applied load and the method of restraining the tower base and top also have its influence on the total loading capacity. All these factors must be taken into consideration when determining the allowable load. More information can be found in the Prolyte Blackbook.
