Description
This device allows a simple and cost effective method, via which two cable ends fitted with standard crimp lug, can be connected together. A bus bar is retained within a threaded section and via two bolts the lugs are connected to the bus bar. The outer housings and cable glands are then screwed onto the retainer, to provide a watertight enclosure around the connection. The housings are manufactured from high impact high dielectric insulation material for user safety and long life.
The joint can quickly be undone and reused time after time. The housing can be locked to prevent unauthorized opening and can be colour coded for phase identification.
The thread form of the bus bar retainer is such that thread requires only a few turns of the housings to tighten. The square thread form also resists abrasion damage, to prevent binding of the coupling thread.
It Comes in 2 x sizes,
CAB0001 for 185-300mm2 cable and CAB0002 for 95-150mm2 cable
Can facilitate cable up to 300mm cross sections Fast to assemble and disassemble
Re useable
High Impact Housings Watertight
No special tools required
Description
|
CAB0001 |
Cab-185-300-BK |
|
CAB0002 |
Cab-95-150-BK |
Contact us for more details on these and the other Network Connectors available from Phase 3 Connectors [email protected]
